[Subject Prev][Subject Next][Thread Prev][Thread Next][Subject Index][Thread Index]

[vine-users:040053] ルート・ファイル・システムのオーバーフロー


片桐です。

/var/log/xdm-errors.log ファイルへの書き込みが止まりません。
以下のようなログが繰り返し書き出されています。
リブート後、telnetで接続しています。
ちょっと長い(100行くらい)ですが。
アドバイスをお願いします。

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 1999
    If the server is older than 6-12 months, or if your card is newer
    than the above date, look for a newer version before reporting
    problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.17-0vl8 i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
      wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
      sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
      tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
      tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
      clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
      clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
      clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
      clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
      mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
      oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
      ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24,
      AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
      ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
      Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi, generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) XKB: rules: "xfree86"
(**) XKB: model: "jp106"
(**) XKB: layout: "jp"
(**) XKB: model: "jp106"
(**) XKB: layout: "jp"
(**) XKB: variant: "nodeadkeys"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) Mouse: type: IMPS/2, device: /dev/input/mice, buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(**) SVGA: Graphics device ID: "Matrox Millennium G200 8MB"
(**) SVGA: Monitor ID: "mel5040"
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "1920x1200" needs hsync freq of 90.98 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/TrueType,tcp/localhost:7100"
(--) SVGA: PCI: Matrox MGA G200 AGP rev 3, Memory @ 0xe3000000, 0xe1000000
(--) SVGA: Linear framebuffer at 0xE3000000
(--) SVGA: MMIO registers at 0xE1000000
(--) SVGA: Video BIOS info block at 0x000c7540
(--) SVGA: Found and verified enhanced Video BIOS info block
(--) SVGA: detected an SGRAM card
(--) SVGA: chipset:  mgag200
(**) SVGA: videoram: 8192k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 250.000 MHz
(**) SVGA: Mode "1152x864": mode clock =  65.000
(**) SVGA: Mode "1024x768": mode clock =  85.000
(**) SVGA: Mode "800x600": mode clock =  69.650
(**) SVGA: Mode "640x480": mode clock =  45.800
(--) SVGA: Virtual resolution set to 1152x864
(**) SVGA: Mode "640x480": mode clock =  45.800
(--) SVGA: Virtual resolution set to 1152x864
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using hardware cursor
(--) SVGA: PLL reference freq: 27.050 MHz
(--) SVGA: Read OPTION 0x4007cd21
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE poly
text)
(--) SVGA: XAA: Using 9 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
(--) SVGA: XAA: Dashed lines and segments
(**) Adding extended device "SWITCH" (type: Switch)
(**) Adding extended device "Mixed USB Mouse" (type: Mouse)
_FontTransSocketINETConnect: Can't connect: errno = 111
failed to set default font path '/usr/X11R6/lib/X11/fonts/TrueType,tcp/localhost
:7100'
Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

xdm error (pid 719): Server for display :0 terminated unexpectedly: 1

====================================================================
 片桐 栄司
 帝国ピストンリング(株) システム開発室
 E-mail: katagiri@teikokupr.co.jp
 TEL. 0266-23-2811 内線 470	FAX. 0266-23-0644
====================================================================

この情報があなたの探していたものかどうか選択してください。
yes/まさにこれだ!   no/違うなぁ   part/一部見つかった   try/これで試してみる

あなたが探していた情報はどのようなことか、ご自由に記入下さい。特に「まさにこれだ!」と言う場合は記入をお願いします。
例:「複数のマシンからCATV経由でipmasqueradeを利用してWebを参照したい場合の設定について」
Follow-Ups: