[Subject Prev][Subject Next][Thread Prev][Thread Next][Subject Index][Thread Index]

[vine-users:050282] Re: DualHead とwacom Intuos i900


On Fri, 10 May 2002 23:58:58 +0900
makoto abe <rikurou@mx5.et.tiki.ne.jp> wrote:

> すいません質問を書くのを忘れていました。
> 常に2つのスクリーンの間を中央だと認識するせいか
> ダイアログボックスなどいろいろなものが起動時に見ずらくなるのです。
> また最大化すると2つのスクリーンにまたがって拡がってしまい
> かえって見づらくなってしまいます。
> どうすれば良いんでしょうか?
二つのディスプレイは19インチと15インチで大きさに差があるため
段差が出来ていることが上記のことを気にしている理由です
もうひとつ質問がありました。

wacom Intuos i900 をデュアルディスプレーで使いたいのですが
どうも挙動がおかしいのです
まず第一に
マウスのように働いてしまう。ということです
一度ペンを離してからもう一度のせることで自由に動いてしまいます
とくにGimpで使えれば良いのでTabletの有効範囲を決めることは出来ないでしょうか?
宜しくお願いします


# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
#tuika1
	Screen      1  "Screen1" RightOf "Screen0"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Mouse9" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "stylus"	"AlwaysCore"
	InputDevice	"eraser" "AlwaysCore"
	InputDevice	"cursor" "AlwaysCore"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType"
    FontPath   "unix/:7100"
    FontPath   "/usr/X11R6/lib/X11/fonts/japanese"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi"


EndSection

Section "Module"
        Load  "GLcore"
        Load  "dbe"
        Load  "extmod"
	Load "fbdevhw"
	Load "pex5"
	Load "dri"
        Load  "glx"
        Load  "pex5"
        Load  "record"
        Load  "xie"

# font rendering engines
	Load  "type1"
	Load  "xtt"
#	Load  "freetype"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#	Option	"AutoRepeat"	"500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"pc106"
	Option	"XkbLayout"	"jp"
	#Option	"XkbVariant"	""
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
	Identifier	"Mouse0"
	# Modified by mouseconfig
	Driver		"mouse"
	Option		"Device"		"/dev/mouse"
	Option		"Protocol"		"IMPS/2"
	Option		"Emulate3Buttons"	"no"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
        Identifier  "Mouse9"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "AlwaysCore"
EndSection
######################Wacom Lines NEW!!
Section "InputDevice"
	Identifier  	"stylus"
	Driver		"wacom"
	Option		"Type"	"stylus"
	Option		"Device"	"/dev/ttyS0"
EndSection

Section "InputDevice"
	Identifier  	"eraser"
	Driver		"wacom"
	Option		"Type"	"eraser"
	Option		"Device"	"/dev/ttyS0"
EndSection

Section "InputDevice"
	Identifier  	"cursor"
	Driver		"wacom"
	Option		"Type"	"cursor"
	Option		"Device"	"/dev/ttyS0"
EndSection
	


Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   30.0-86.0
        VertRefresh 50.0-152.0
        Option "dpms"

EndSection
#tuika2

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync   28.0-49.0
        VertRefresh 43.0-72.0
	Option	"dpms"
	#tuika5
	#Modeline  "1024x768"      25.20    1024  656  752  800   768  490  492  525 -hsync -vsync
EndSection


Section "Device"
	# no known options
	Identifier   "CARD0" 	#Modify1
        Driver       "nv"
        VendorName   "NVIDIA GeForce 2 GTS (generic)"
        BoardName     "NVIDIA GeForce 2 GTS (generic)"
#tuika3
	BusID       "PCI:1:0:0"
EndSection
#tuika4
Section "Device"
	Identifier   "CARD1"
	Driver      "mga"
	VendorName  "Matrox"
	BoardName   "MGA 2064W"
	BusID       "PCI:0:8:0"
EndSection

Section "Screen"
	Identifier   "Screen0"
        Device       "CARD0"	#Modify2
        Monitor      "Monitor0"
	DefaultDepth	24

	Subsection "Display"
        	Depth       24
                Modes       "1280x1024" 
	EndSubsection

EndSection

Section "Screen"
	Identifier   "Screen1"
        Device       "CARD1"	
        Monitor      "Monitor1"
	DefaultDepth	24

	Subsection "Display"
        	Depth       24 
                Modes       "1024x768" 
	EndSubsection

EndSection

Section "DRI"
	Mode 0666
EndSection

この情報があなたの探していたものかどうか選択してください。
yes/まさにこれだ!   no/違うなぁ   part/一部見つかった   try/これで試してみる

あなたが探していた情報はどのようなことか、ご自由に記入下さい。特に「まさにこれだ!」と言う場合は記入をお願いします。
例:「複数のマシンからCATV経由でipmasqueradeを利用してWebを参照したい場合の設定について」
References: